Publicidad
Idiomas disponibles
Idiomas disponibles
MICROWAVE WALL OVEN INSTALLATION INSTRUCTIONS
MICROWAVE WALL OVEN INSTALLATION
ANITI-TIP BRACKET INSTALLATION
fA. CAUTION
Cutout Width
Two persons are required to install the oven. Never
(See dimensions below)
hold the door handle when moving the oven.
pone cesses eee ee eee eres
3.
Place the oven adjacent to the opening on a table or
Hoe
UZ
stand. Plug the power supply cord into the electrical
Anti-Tip Brackets
Cutout Height
outlet. Carefully guide the oven into the prepared
21" (53.3
cm) Min.*
opening. Avoid pinching cord between oven and wall.
16-1/2"
1-1/2" (54.6 cm) Max."
See Figure 4. Push the unit in and against the cabinet.
(41.9. cm)
The oven side bracket will clip into the Anti-Tip brackets.
i
See Figure 3.
i
4. To pull out the oven for servicing, open the door and
teeneedecwereweneeeccnon
second
locate the two holes on the side frame. Simultaneously
/
EW27SO60LS Cutout Width
insert the tools provided with the appliance in both
25-1/8" (63.8 cm) Min.*
holes and pull the oven towards you. See Figure 5.
25-5/8" (65.1 cm) Max.*
25-3/8" (64.5 cm) Recommended*
EW30SO60LS / E30M075HSS / E30M075HPS Cutout Width
28-1/2" (72.4 cm) Min.*
29" (73.7 cm) Max.*
.
28-3/4" (73.0 cm) Recommended*
Figure 3
FINISHED ANTI-TIP BRACKET INSTALLATION
REMOVING OVEN FOR SERVICING
Anti-Tip Bracket
installed in cabinet
Oven removed
from the cabinet
Cabinet
aninet
Anti-Tip
Bracket
released
Right Side
Tool supplied
Figure 4
Figure 5
E3
Publicidad
