Descargar Imprimir esta página

Jata JVVS3014 Instrucciones De Uso página 8

Circulador de aire industrial

Publicidad

• Do not use outdoors.
• Do not use it without the frontal grid correctly assembled.
• Do not put the fingers or other objects into the fan to prevent
the engine block.
• Manipulation or replacement of any component must be
performed by an authorized service centre.
• If the power cord is damaged, it must be replaced by the
manufacturer or by its after-sales service or similar qualified
personnel in order to avoid a danger.
INSTRUCTION OF USE
• Remember the fan always must be placed on a flat and stable surface.
• Plug the appliance into the mains.
• Move the air flow by turning the body of the appliance forwards or backwards.
• Press the speed selector (2) to:
Position 0 - Off.
Position 1 - Minimum speed.
Position 2 - Medium speed.
Position 3 - Maximum speed.
MAINTENANCE AND CLEANING
• Before you proceed to cleaning, make sure the appliance is unplugged from the mains.
• Clean with a slightly damp cloth.
• It is important to keep the frontal grid next to the blades and the back grid next to the switch, clean of dust.
• Do not use abrasive or chemical products, such as metallic scourers, which may deteriorate the surfaces of
the appliance.
ENVIRONMENT PROTECTION
• Dispose the appliance according to the local garbage regulations.
• Never throw it away to the rubbish. So you will help to the improvement of the environment.
ATTENTION
• Avant de mettre en marche le ventilateur, veuillez lire
attentivement cette notice et conservez-la pour vous y reporter
au besoin.
FRANÇAIS
8

Publicidad

loading