Publicidad
Using the key (turn anti-clockwise), unlock the two drive units.
Insert the crank and its bushing into the toothed part of the drive unit (outfeed shaft) and secure both with the
screw and washer.
IMPORTANT: the two connecting rods are different (one left, one right).
Position of the arms for an INWARD opening gate
Position the arm, making sure the distance between the two points is 70 cm (see illustration below).
Screw or weld the bracket to the leaf.
Position of the arms for an OUTWARD opening gate
Environ 65 cm
approx. 70 cm
35 cm
13 cm
GB
7
INSERT ALLEN KEY
HERE
Publicidad
