Audizio 102.450 Manual De Instrucciones página 12

(alternatively press the [INFO] on the remote). New digital radio stations should be picked up automatically by the radio if
they are part of a multiplex you already received. Otherwise you need to do the Preset Scan again.
To receive the ordinary FM stations (no internet connection is required), place the radio close to the window and extend the
antenna as far as it can go to get the best reception. You may need to adjust the direction of the antenna to improve
reception.
On the Home menu, scroll to FM Radio or use the [Mode] button on remote to switch to FM Radio. Confirm by pushing
[Dial/Select] knob or press [OK] on the remote.
It will ask whether you want to Scan FM Station. Press [OK] to start scanning and it will show the progress on the number of
channels are found. When it is done, it will automatically save the found channels on presets and display the list for your
action.
You can select the channel and start listening to it. Whenever you want to add to My Favourite, press the [ ] button on
remote or press and hold the [ ] button on the unit, and it will add to the favourite list.
Always press the [◄] button to return to the Preset list.
Note: When it is playing FM radio, press the [►] button on the radio to view more radio information, each time you press the
[►] button, it will display various information at a time such as radio frequency and big clock display (or press the [INFO] on
the remote).
Manual Tune
To manual tune the frequency, rotate the [Dial/Select] knob on the radio device or press the [ / ] button on remote to
fine tune the frequency.
The device supports UPnP and is DLNA-compatible. This provides the opportunity to stream music from your network.
However, this requires you to have a compatible device in your network that can function as a server. This can be e.g., a
network hard drive or a conventional PC with e.g., Windows 8 via which access to the shared folder or media sharing is
permitted. The folders can then be browsed and played on the radio.
Note: Please make sure your computer laptop is on the same Wi-Fi network as the Radio before you start using this function.
Music streaming
• Once the UPnP/DLNA compatible server is configure to share media files with your radio, you can start music streaming.
• On the main menu, select Media Centre and choose UPnP.
• It may take a few seconds for the radio to complete the scan for available UPnP servers. If no UPnP servers are found, it will
show Empty List.
• After a successful scan is done, select your UPnP server.
• The radio will show the media categories available from the UPnP server, e.g. 'Music', 'Playlists' etc.
• Choose the media files that you wish to play. You can set the mode of playback under Configuration > Playback setup.
My Playlist
You can make your own playlist for the UPnP music files. Choose and highlight the song you want to add to playlist, press and
hold the [ ] button on the radio device or press the [ ] preset button on remote, until the sign appears. The song will be
added to My playlist.
Clear My Playlist
Remove all songs in "My Playlist" to allow a new playlist to be prepared.
Note: If you have DLNA compatible servers available, follow the steps described above to browse the audio files from DLNA
compatible device on the radio to play.
Before transmission between your BT device and the radio is possible, both devices must be coupled. This process is called
"pairing". The radio is served as a receiver, to receive music stream to play on the radio.
If you have already coupled to a BT device before, this connection will be restored automatically when both devices are in
range and BT operation has been selected on the radio. "Pairing" does not have to be repeated. This function
12