Audizio 102.450 Manual De Instrucciones página 13

may need to be activated in your BT device, however.
•
Push the Menu button to display the selection menu for the different operating modes.
•
Use the up/down button to select the operating mode BT and push the dial switch.
•
Switch your BT device to which you want to connect the radio on and activate the pairing mode here. The device
scans for BT devices in the reception range.
•
When the radio is found, your BT device shows its name Audizio Vicenza-XXXX (the XXXX is an identification code for
your radio unit).
•
Select the radio at your BT device.
•
Start playback on your BT device.
•
Playback now takes place using the radio.
Important!
In order to use the Alarm clock function, it is strongly suggested to connect a power supply to the radio to ensure sufficient power
is given for the Alarm to go off. Moreover always set the radio in Standby for the alarm to work. When the radio is activated,
press the [ ] button to put the radio into standby.
• Choose Alarm from the main menu or press the [Alarm] button on the remote control.
• Select either Alarm 1 or Alarm 2, choose Turn on to activate the Alarm.
• Follow the alarm wizard instructions to set the alarm.
• The wizard will guide you through the settings below:
Time - Set the time for the alarm.
Sound - You can choose Wake to Tone, My Favourite as the alarm source.
Repeat - You can schedule the alarm as you desire: Everyday, Once or multiple days.
Alarm Volume - Adjust the volume of the alarm as you like by rotating the [Dial/Select] knob or [▲/▼] button on
remote.
Alarm duration - Set the duration of the alarm from the preset options ranging from 30 to 180 minutes. The radio
will be turned to standby when the selected duration of time is due.
• After the above settings are completed, press the [◄] button to exit and make sure the Alarm is turned on. You will see the
Alarm icon appeared on the display if it is activated.
Stopping Alarm/Activate the Snooze function
When the alarm goes off, press the [ ] to stop the alarm or press the [Dial/Select] knob to activate the Snooze feature.
When the Snooze is activated, the alarm is muted for 9 minutes and sounds again when the time is due. You can repeat the
process multiple times. To stop the "Snooze" function, press the [ ].
Setting the Timer
The device offers the Timer function as a kitchen timer. The time will count down from a specified time and ends with a
beeping sound. Timer settings is up to 99 hours, 59 minutes, 59 seconds.
The beeping sound volume and sound duration is adjustable from the Timer settings in Configuration menu.
Switching off the timer
When the alarm sounds, you can turn it off by pressing the [Dial/Select] knob on the radio device or [OK] button on the
remote control.
In case the device is switched to another menu rather than the Timer display when the alarm sounds, return to the Timer
display in order to switch off the alarm.
You can set the timer to let the radio turns off after the selected time elapsed in the range of 15 minutes to 180 minutes.
Press [ ] button on the remote control to set the timer.
13