Publicidad
Idiomas disponibles
Idiomas disponibles
the heater.
ො Do not install the heater right below a socket.
ො Do not let animals or children touch or play with the fan heater. Pay attention! The air
outlet gets hot during operation (more than 80ºC, or 175 F ).
ො Do not cover. If covered, there is the risk of overheating.
ො Do not use this fan heater in the immediate surroundings of a bath, a shower or a
swimming pool.
ො Do not use the fan heater in the rooms with explosive gas or while using inflammable
solvents, varnish or glue.
ො If the cord of this appliance is damaged discontinue use of this product and contact
your retailer for further instructions.
ො Keep the fan heater clean. Do not allow any objects to enter any ventilation or exhaust
opening as this may cause electric shock, or fire or damage to the heater.
WARNINGS
ො Do not use the heater in the immediate surroundings of a bath, a shower or a swim-
ming pools.
ො Always use the heater in an upright position.
ො Do not use the heater to dry your laundry. Never obstruct the intake and outlet grilles
(danger of overheating).
ො The heater must be positioned at least 50cm from furniture or other objects.
ො When the appliance is used in portable version, do not place it up against walls, furni-
ture, curtains, etc.
ො The appliance must be installed so that the switches and other controls can not be
reached by persons using the bath tub or the shower.
ො This appliance comes with a Y-type connection. Replacement of the feed cable must be
entrusted to a technician only, because such work requires special tools.
ො The appliance must not be positioned directly underneath a fixed power point.
ො Do not use the appliance while it is cooling down, in order to avoid overheating with
the attendant risk of fire.
ො Do not use the appliance in rooms less than 4m
ො The heater is equipped with a safety device that switches off the heating in case of
accidental overheating (for example, obstruction of the air inlet and outlet grilles). Set
the switch to "0", remove the plug from the socket and correct the cause of the over-
heating. Wait for the appliance to cool down before plugging it back in and turning it
back on (usually about 10 minutes).
area.
2
Publicidad
