Dolmar TM-102.16 Manual De Instrucciones página 134

36
EN
1)
See the engine manual for the full list and frequency.
2)
Replace at the first signs of wear, contacting a Licensed Service Centre.
3)
General lubrication should also be carried out whenever the machine is to be left
unused for a long period.
The above table is there to help you maintain your machine's safety and performance.
It shows the main maintenance and lubrication operations and their frequency. To the
right of each item, there is a box where you can write the date or after how many oper-
ating hours the work was carried out.
WARNING!
!
All checks, adjustments and replacements not described in
chapters 6.3 and 6.4 of this manual must be carried out by your Dealer or a
specialized Service Centre. Both have the necessary knowledge and tools to
ensure that the work is carried out correctly without affecting the safety of the
machine.
6.2.2. S
UMMARY OF THE MAIN SITUATIONS WHERE WORK MAY BE REQUIRED
Every time that ...
The blades vibrate
AThe blades tear the grass and the lawn
becomes yellow
The cut is uneven
The blades engage in an abnormal way
The machine does not brake
Forward movement is erratic
The grass-catcher jumps around and
tends to open up.
6.2.3 E
NGINE
IMPORTANT
Follow all the instructions in
the engine manual.
To empty the engine oil, unscrew the oil plug (1).
When refitting the plug, make sure the seal is posi-
tioned correctly.
You will need to ...
Contact Your Dealer
Contact Your Dealer
Adjust the alignement of the cutting deck (☛ 6.3.2).
Contact Your Dealer
Contact Your Dealer
Contact Your Dealer
Adjust the spring (☛ 6.3.6)
MAINTENANCE
1