Dolmar TM-102.16 Manual De Instrucciones página 115

CONTROLS AND INSTRUMENTS
a) Operating functions
1
of what functions are running.
2
3
NOTE
The flashing light indicates that the engine's rotation speed is not
suitable for cutting grass.
4
– press the «MODE» button several times to bring up the clock icon;
– press the «MODE» button until the first two digits flash (hour);
– press one of the side buttons (a – b) to increase or decrease by a unit;
– press the «MODE» button until the other two digits flash (minutes);
– press one of the side buttons to increase or decrease by a unit;
– press «MODE» to complete your setting.
1. Hour counter. Indicates the total number of engine
running hours.
NOTE
after a certain number of hours ( ☛ 6.2.2). This is indi-
cated by the display, which opens the "Hour counter"
function and flashes for approx. 2 minutes, regardless
2. Voltmeter. Indicates the battery charge level.
3. Speed indicator. Indicates the engine's rotation
speed with a series of asterisks, i.e.
✱
engine at minimum speed
(✱✱)
✱✱
✱✱✱
travelling speed
✱✱✱✱
✱✱✱✱✱
cutting speed
✱✱✱✱✱✱
a ➤
4. 24-hour clock (
You can change the time with the key turned to «ON»
b
and the engine off, by following the steps below:
The machine needs servicing
if fitted)
17
EN