Makita UR013G Manual De Instrucciones página 2

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Handle type
No load speed
Overall length
(without cutting tool and battery)
Nylon cord diameter
Applicable cutting tool and
cutting diameter
Rated voltage
Net weight
Protection degree
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
*1: Weight without the batteries, cutting tool, blade cover, and harness.
*2: The lightest and heaviest combination of weight, according to EPTA-Procedure 01/2014. The weight may differ
depending on the attachment(s), including the battery cartridge(s).
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Applicable cord connected power source
Portable power pack
• The cord connected power source(s) listed above may not be available depending on your region of residence.
• Before using the cord connected power source, read instruction and cautionary markings on them.
2-tooth blade
(P/N 198345-9)
3-tooth blade
(P/N 195299-1)
4-tooth blade
(P/N 196895-8)
Nylon cutting head
(P/N 191Y88-2)
*1
*2
1,863 mm (73-1/2")
2.0 - 2.3 mm (0.08" - 0.09")
D.C. 36 V - 40 V max
5.9 - 7.2 kg (13.0 - 15.9 lbs)
BL4020 / BL4025 / BL4040 / BL4050F* / BL4080F*
* : Recommended battery
DC40RA / DC40RB / DC40RC
2 ENGLISH
UR013G
Bike handle
0 - 6,700 /min
255 mm (10")
255 mm (10")
255 mm (10")
450 mm (17-3/4")
5.3 kg (11.7 lbs)
IPX4
PDC01 / PDC1200