Klarstein 10045818 Manual Del Usuario página 19

PRODUCT DESCRIPTION
1 Control Panel
2 Handle
3 Adjustable Foot
4 Cover
5 Wooden shelf
6 Guard Bar
7 Lock
USE AND OPERATION
Before Using Your Beverage Cooler
Remove the exterior and interior packing. Before connecting the beverage cooler
to the power source, let it stand upright for approximately 4 hours. This will reduce
the possibility of a malfunction in the cooling system from improper handling during
transportation. Clean the interior surface with lukewarm water using a soft cloth.
Installing Your Beverage Cooler
This beverage cooler is designed to be free standing only, and should not be recessed
or built-in. Adjust the feet to keep the beverage cooler level. Locate the beverage cooler
away from direct sunlight and sources of heat (stove, heater, radiator). Direct sunlight
may affect the acrylic coating and heat sources may increase electrical consumption.
Ambient temperature below 5 °C or above 32 °C will hinder the performance of this
appliance.
EN
19