Klarstein 10045818 Manual Del Usuario página 21

Vacation Time
• Turn off the beverage cooler first and then unplug the unit from the wall outlet.
• Remove all the contents.
• Clean the appliance.
• Leave the lid open slightly to avoid possible formation of condensation, mold, or odors.
• Short vacations: Leave the beverage cooler operating during vacations of less than three
weeks.
• Long vacations: If the beverage cooler will not be used for several months, remove all
content and unplug the power cord. Clean and dry the interior thoroughly. To prevent
odor and mold growth, leave the door open slightly: blocking it open if necessary.
Moving Your Appliance
• Turn off the beverage cooler first and then unplug the unit from the wall outlet.
• Remove all the contents.
• Securely tape down all loose items inside your appliance.
• Tape the doors shut.
TROUBLESHOOTING
Problem
Wine cooler do not operate.
Wine cooler is not cold enough.
The light does not work.
Vibrations.
The beverage cooler seems to
make too much noise
The door will not close properly.
Possible Cause
Not plugged in. The circuit breaker tripped or a
blown fuse.
Check the temperature control setting.
External environment may require a higher setting.
The door is open too often.
The door is not closed completely.
The door seal does not seal properly.
The beverage cooler does not have the correct
clearance.
Check the service center.
Check to assure that the beverage cooler is level.
The beverage cooler is not level.
Check the fan.
Beverage cooler is not level.
The doors were reversed and not properly ins-
talled.
The seal is weak.
EN
21