Sony TAM-2000 Manual De Instrucciones página 22

Turning the answering function on or off
Turning on the answering function
Press ANSWER ON/OFF so that the ANSWER ON indicator
lights.
If you set the answering machine to normal mode, the indicator
flashes when there are messages that have not been played bade.
See "Selecting the answering mode/types of greetings" on page 18
for selection of the answering mode.
■ If remaining memory space is not enough-
• If the remaining time for recording messages is less than 4
minutes, the answering machine announces the remaining time
in minute when you turn on the answering function.
• If the remaining time is less than a minute, flashes in the
message counter. The answering machine instructs you to
erase the messages In the memory when you try to turn on the
answering function. You cannot turn on the answering
function unless you erase the messages.
■ To speak to the caller-
You can speak to the caller even after foe answering machine
starts answering the incoming call
To speak to the caller, pick up the handset of your telephone
connected to the answering machine.
The answering machine stops playback of the greeting, and you
can speak to the caller. (If playback does not stop, press PLAY/
STOP.)
■ To turn off the answering function-
Press ANSWER ON/OFF so that the ANSWER ON indicator
goes off.