Whirlpool OMK58HU1X Manual Del Usuario página 8

TROUBLESHOOTING
Problem
The oven is not working.
The display shows the
letter "F" followed by a
number or letter.
The display is showing the
message "Hot" and the
selected function will not
start.
The display shows unclear
text and appears to be
broken.
DOOR LOCK DEVICE*
When keeping door lock installed, door must be
manually closed. To open the door with the door lock
device (see Fig. 1).
The door safety device can be removed by following
the sequence of images (see Fig. 2).
* Available only on certain models
Policies, standard documentation and additional product information can be found by:
• Using the QR code in your appliance
Visiting our website docs . whirlpool . eu
•
Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When contacting our After-
•
sales Service, please state the codes provided on your product's identification plate.
8
Possible cause
Power cut.
Disconnection from the
mains.
Oven failure.
Temperature too high.
Another language set.
Solution
Check for the presence of mains electrical power and
whether the oven is connected to the electricity supply.
Turn off the oven and restart it to see if the fault persists.
Contact you nearest Client After-sales Service Centre
and state the number following the letter "F".
Allow the oven to cool down before activating the
function. Select a different function.
Contact your nearest Client After-sales Service Center.
1 2
400011707471