Paso 37 Setting The Idler Tension; Paso 38 Stickers Parts Preparation - Prusa Research MMU3 Manual Del Usuario

PASO 37 Setting the Idler tension
Cierra la unidad y aprieta ligeramente los tornillos tensores del tensor.
Ajuste ambos tornillos tensores del tensor de modo que la parte superior de la
cabeza del tornillo quede ligeramente por encima de la superficie superior del
idler-body.
This is the setting which works for the majority of materials. Some specific
filaments might require a slightly different idler tension setting.
The correct idler tension is crucial and might require further adjustment on your
MMU unit.
With too low idler tension, the MMU unit might struggle with grabbing the
filaments properly.
With too high idler tension, the idler will struggle with determining its home
position and the MMU unit won't work properly.
PASO 38 Stickers parts preparation
66
6. Montaje del cuerpo de polea
Ensamblaje Original Prusa MMU3
Para los siguientes pasos, por
favor prepara:
Serial number sticker (1x)
Safety sticker (1x)