Descargar Imprimir esta página

Metabo STA 18 LTX 150 BL Manual Original página 13

Ocultar thumbs Ver también para STA 18 LTX 150 BL:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 30
8.4
LED light
For working in badly lit areas. The LED light (4)
lights up when the machine is switched on.
STA 18 LTX 150 BL 601502000: Switch off LED (4)
via switch (18).
If the LED light is flashing, see chapter 10.
8.5
Application note
Plunging: You can plunge the jigsaw blade into
workpieces made from thin, soft materials without
needing to drill a hole beforehand. Only use short
saw blades. Only at 0° angle setting.
Set the adjustment lever (7) to the "0" position
(pendulum motion is deactivated). Position the
jigsaw with the front edge of the footplate (17) on the
workpiece. Hold the operating jigsaw firmly and
guide slowly downwards. Once the saw blade has
penetrated the workpiece, the pendulum motion
can be activated.
9. Cleaning, Maintenance
Remove the battery pack from the machine before
making any adjustments, changing tools,
maintaining or cleaning.
Clean the machine regularly. This includes
vacuum cleaning the ventilation louvres on the
motor.
Clean the saw blade clamping fixture (22) regularly
and thoroughly by blowing with compressed air.
If necessary, clean the openings behind the saw
blade support roller (21).
Apply a drop of oil to the saw blade support roller
(21) from time to time.
10. Troubleshooting
The LED light (4) is flashing SLOWLY and the
machine has been switched off automatically.
The machine switches off if it is overloaded for an
extended period or if the saw blade is jammed.
Switch off the machine using the slide switch (19).
Switch it on again and continue to work as normal.
Avoid any additional overloading or jamming.
The LED (4) is flashing quickly and the machine
is not running. Restart protection is active. The
machine will not start if the battery pack is inserted
while the machine is on. Switch the machine off and
back on again.
11. Accessories
Use only original Metabo or CAS (Cordless Alliance
System) battery packs and accessories.
Use only accessories that fulfil the requirements
and specifications listed in these operating
instructions.
Chargers: ASC 55, ASC 145, etc.
Fig. A
Fig. D
Order no.: 627044000 ASC 55
Order no.: 627378000 ASC 145
etc.
Battery packs 18V:
Order no.: 625368000 5.5 Ah (LiHD)
Order no.: 625369000 8.0 Ah (LiHD)
Order no.: 625594000 10.0 Ah (LiHD)
etc.
Fit accessories securely. If the machine is operated
in a holder: secure the machine well. Loss of control
can cause personal injury.
Fig. E p. 3:
Circular-cutting and parallel guide
For sawing circles (dia. 100 - 360 mm) and making
cuts parallel with edges (max. 210 mm).
Fig. E p. 3 I:
Attaching the circular cutting guide
- Slide the rod on the circular-cutting and parallel
guide sideways into the footplate (centre point (c)
faces downwards).
- Set the desired radius (d).
- Tighten screw (b).
Fig. E p. 3 II:
Attaching the parallel guide
- Slide the rod on the circular-cutting and parallel
guide sideways into the footplate (centre point (c)
faces upwards).
- Set the dimension (e)
- Tighten screw (b).
See www.metabo.com or the catalogue for a
complete range of accessories.
12. Repairs
Repairs to electrical tools must only be carried
out by qualified electricians!
Contact your local Metabo representative if you
have Metabo power tools requiring repairs. For
addresses see www.metabo.com.
You can download a list of spare parts from
www.metabo.com.
13. Environmental Protection
Observe national regulations on environmentally
compatible disposal and on the recycling of disused
machines, packaging and accessories.
Battery packs must not be disposed of with regular
waste! Please return faulty or used battery packs to
your Metabo dealer!
Do not throw battery packs into water.
Only for EU countries: never dispose of
power tools in your household waste!
According to European Directive 2012/19/EU
on Waste from Electric and Electronic Equipment
and implementation in national law, used power
tools must be collected separately and recycled in
an environmentally-friendly manner.
Discharge the battery pack in the power tool before
disposal. Prevent the contacts from short-circuiting
(e.g. by protecting them with adhesive tape).
ENGLISH en
13

Publicidad

loading

Este manual también es adecuado para:

Stab 18 ltx 150 bl