Vacuum Maintenance And Care; Regular Maintenance - Kenmore 31510 Manual De Uso Y Cuidado

Regular Maintenance

For optimal performance, follow the
instructions below to clean and maintain
the robot. Reference the table below as a
guide for how often you should be cleaning
and replacing parts of your robot.
NOTE:
The cleaning and/or
replacement frequency will depend on
your usage of the robot.
Cleaning
Robot Part
Frequency
Once every
Filter
week
Filter Once every
Basket week
Once every
Brushroll
week
Side Once every
Brushes month
Brushroll Once every
Cover month
Anti-drop Once every
Sensors month
Charging Once every
Dock Pins month
Front
Once every
Swivel
month
Wheel
Emptying the Dust Bin and Cleaning
Filters
CAUTION
Do not use the robot when the dust bin is
full.

VACUUM MAINTENANCE AND CARE

Replacement
Frequency
Every 2 months
Every 2 months
Every 6-12 months
Every 3-6 months
(or when visibly
worn)
Every 3-6 months
(or when the
silicone rubber
strip on the cover
becomes visibly
worn)
N/A
N/A
N/A
1. Press the Dust Bin Release Button and
slide out the dust bin from robot.
2. Holding the dust bin upright, snap the
back panel open and empty contents
into receptacle. To re-install, snap panel
back into dust bin.
3. Open the filter cover and take out the
filter and filter basket.
4. Clean the dust bin and filters with the
included cleaning tool.
NOTE:
Do not wash the filter. Use the
included cleaning tool to remove debris
from filter.
- 17 -