Troubleshooting - Kenmore 31510 Manual De Uso Y Cuidado

Should you have any problem(s) with your robot vacuum cleaner, review the table below
for solutions to minor performance issues. If the issues cannot be solved, first try to turn off
the robot vacuum cleaner and restart.
PROBLEM
Robot vacuum
cleaner will not
power on.
Robot vacuum
cleaner does not
work.
Robot vacuum
cleaner stops
working suddenly.
Robot vacuum
cleaner reverses
backwards
irregularly.
Robot vacuum
cleaner does not
clean automatically
at scheduled time.

TROUBLESHOOTING

POSSIBLE CAUSE
The robot vacuum cleaner is
powered off.
The battery may be
depleted.
The anti-drop cliff sensors
are dirty.
The side brushes are jammed.
The wheels are jammed.
The battery may be
depleted.
The brushroll is jammed or is
installed incorrectly.
The robot vacuum cleaner is
stuck in an area.
The front bumper sensor is
jammed.
The robot vacuum cleaner is
powered off.
The scheduled time is set
incorrectly.
The battery may be depleted. Charge the battery as instructed on page 11-12.
The scheduled time has been
reset.
Press the quick start power button to turn the
robot vacuum cleaner on.
Charge the battery as instructed on page 11-12.
Clean the anti-drop cliff sensors.
Remove any entangled objects or string/hair
wrapped around brushes.
Remove any entangled objects and clean wheel
housing by rotating wheel while dusting.
Charge the battery as instructed on page 11-12.
Remove the obstruction and reinstall the
brushroll. Follow instructions on page 19.
Free the robot vacuum cleaner and remove the
obstacles. Restart the vacuum cleaner.
Remove any debris that may have become
trapped behind the front bumper sensor.
Press the quick start power button to turn the
robot vacuum cleaner on.
Reset the scheduled time as instructed on page
16.
All settings may be erased when robot vacuum
cleaner is turned off or when the battery power
is exhausted. You may need to reset the time and
reschedule the cleaning time.
- 21 -
SOLUTION