Publicidad
Idiomas disponibles
Idiomas disponibles
05 MAINTENANCE
POLLUTION SENSOR
21
1
Open the air quality sensor cover.
Air outlet
Air Inlet
2
Clean the lens, dust inlet, and dust
outlet with a wet cotton swab, and
then remove water with a dry one.
· _ P erformance of air quality may decrease if not
cleaned regularly.
· _ C lean more often in an environment with heavy
dust presence.
3
Use a soft brush or vacuum cleaner to
clean the air inlet and the air outlet of
the air quality sensor.
· _ B e careful not to let dust fall inside the product
when cleaning.
Dust outlet
Lens
Dust inlet
Always unplug the power cord before cleaning.
To clean the product, do not use organic solvents
(thinner, etc.), bleach, or detergents containing
chlorine or abrasives.
Do not immerse the product in water or spray
water on it.
NOTE
Publicidad
