MotionBlinds CM-08-E Guía De Configuración página 15

Change motor speed / sound level
WARNING: Make sure the USB-C cable is removed. Otherwise you will delete the end limits.
Hold the program button for 5 seconds to change the motor speed / sound level. The blind steps up
and down 1 time to indicate that the speed has been adjusted to 1 of the 3 levels. Warning: release
the button after 5 seconds when the blind steps up and down to avoid resetting the connection.
Reset the connection
WARNING: Make sure the USB-C cable is removed. Otherwise you will delete the end limits.
Hold the program button for 10 seconds to delete the connection between the blind and the app.
The LED lights up 5 times and the blind steps up and down 1 time to indicate that the connection is
reset. Now the blind can be reconnected.
Reset the blind
WARNING: Make sure the USB-C cable is removed. Otherwise you will delete the end limits.
Resetting the blind results in deleting the end positions and connections of the blind with apps
and remote controls. Shortly press the program button to activate program mode. The blind will
start stepping up and down.Hold the reset/program button for at least 20 seconds to reset the
blind. The blind will stop stepping twice. After the second stop, the blind will give one extra step
to indicate that is has been reset.
1-3
5 s
5 x
10 s
Short press
+
15
5 x
20 s