MotionBlinds CM-08-E Guía De Configuración página 27

Top-down/bottom-up with remote (bottom rail)
2
Pair the bottom rail motor to an empty channel on the remote.(see page 18)
.1
Centre
Check the direction of rotation of the bottom rail (see page 18) and move the bottom rail to the desired
.2
bottom position. Simultaneously hold the centre and the up button on the remote until the blind stops
stepping and starts stepping again. The bottom position has been saved
Move the bottom rail to the desired top position. Program the top position of the bottom rail.
.3
Simultaneously hold the centre and the down button on the remote until the blind stops stepping and
starts stepping again. The top position has been saved
Up
Centre
Down
27