Cleaning And Maintenance - ECOFOREST VAP Serie Manual De Instalación Y Mantenimiento

Screw the WiFi antenna to the docking station. This magnet base must be stuck to the back of the boiler.
Once assembled, the unit has to remain in a vertical position.

Antenna.

Magnet connection base.
Place the magnet connection base with the antenna where appropriate. When possible, avoid the presence
of metal sheets around the antenna as the WiFi signal might be distorted.
WiFi upper view.
6.

CLEANING AND MAINTENANCE.

To ensure the correct operation of your boiler, the following Cleaning and maintenance operations are
necessary at the indicated frequency. The boiler must always be cold.
The deterioration of the boiler parts by a lack of cleaning involves the loss of the two-year warranty offered
by ECOFOREST (see warranty section).
It is highly recommended to exercise extreme caution when handling the interior of the boiler, due to the
possible existence of sharp edges or manufacturing burrs.
MAINTENANCE AT END OF SEASON OR AFTER AN ALARM MESSAGE (A001/A036/A037/A038).
This is necessary to ensure correct operation and maintain the stove's life duration. When winter ends,
contact your provider (if he did not contact you) and meet to carry out this maintenance; the following shall be done
(the stove must always be disconnected from power):

Screw driver / allen wrench. 3, 4 and 5mm

Screw driver / Torx wrench. T20

Spanner.

Cable / cord / wire.

Cleaning brush

Vacuum cleaning

Exchanger cleaner.
Tools needed for cleaning and maintenance.
7, 10 and 15mm
L > 800mm
53
WiFi plan view with no metal objects around.
Drawing 18
Drawing 19