Publicidad
Idiomas disponibles
Idiomas disponibles
WIRING
2. Wrap electrical tape (not included) around
each individual wire nuts (AA) down to the
wire.
WARNING: Make sure no bare wire or
wire strands are visible after making
connections. Place GREEN and WHITE
connections on opposite side of box from the
BLACK connections.
Turn spliced/taped wires upward and gently
push wires and wire nuts (AA) into outlet box.
Gently slide remote control receiver smooth
3.
side up into mounting bracket (A). Turn
spliced/taped wires upward and gently push
wires and wire nuts (AA) into outlet box. Let
antenna from remote control receiver hang to
the side.
NOTE: The remote control included with this
fan meets the following requirements:
a. Not for use with solid state fans.
b. Electrical rating: 120V/60 Hz; motor
amps:1.5 MAX.
Should you choose to use a different remote
control with this fan, it must also meet these
same requirements.
2
3
Antenna
Receiver
11
Publicidad
