Harbor Breeze FARMINGDALE Manual Del Usuario página 14

FINAL INSTALLATION
FAN WITHOUT LIGHT KIT
1. Remove the light plate from the LED light kit
(I) by remove three screws on top of the LED
light kit (I).
2. Remove the adapter plate from the LED light
kit (I) by remove three screws on top of the
LED light kit (I).
3. Carefully take off the plastic shade from the
LED light kit (I) by use the flat blade
screwdriver into the two holes on top of the
LED light kit (I).
4. Remove the LED module plate from the light
mounting kit by remove three screws on the
light mounting kit. Take off the LED module
plate and LED module.
1
2
3
4
14
Screws
Light Plate
Screws
Adapter Plate
Flat Blade
Screwdriver
Plastic
Shade
Light
Mounting Kit
LED Module
Plate
LED Module
Screws