Harbor Breeze FARMINGDALE Manual Del Usuario página 13

FINAL INSTALLATION
If you do not plan to install the light kit with your fan
at this time, skip step 4 and proceed to next step.
CAUTION: Before starting installation,
disconnect the power by turning off the circuit
breaker or removing the fuse at the fuse box.
Turning power off using the fan switch is not
sufficient to prevent electric shock.
NOTE:If the light kit could be wobbled by hand, it
means the light kit (I) is not twisted completely till
the right position. Keep twisting the light kit till it
could not be wobbled by hand.
4. While holding the 20W LED light kit (I) under
the fan motor assembly (F), snap together
the wire connection plugs :
White to white
Black to black
Position the notches on the inner edge of
the 20W LED light kit (I) so they match the
tabs on the outside of the rim on the light kit
mounting plate. Carefully lift the 20W LED
light kit (I) inside the light kit mounting plate
and secure it to the fan by turning the 20W
LED light kit (I) clockwise until snug.
4
Light Kit
Mounting
Plate
Wire
Connection
Plugs
Notches
13
Tabs