Operator Information - Kemper MaxiFil Clean Manual De Uso

KEMPER MaxiFil Clean Instruction manual - EN
1.3

Operator information

This manual is an essential part of the MaxiFil Clean device.
The operator shall ensure the operating staff has become familiar with the manual.
The operator is obliged to complement the Instruction Manual with operating
instructions arising from the national accident prevention and environmental
protection regulations, including information on supervisory and reporting obligations
to take account operational features, e.g. regarding organization of work, work
processes and deployed personnel. In addition to the instruction manual and the
binding accident prevention regulations applicable in your country and in the place
where the device is used, it is necessary to take into account the recognized
technical rules for safe and proper handling.
The operator shall not perform any changes, additions and alterations to the
MaxiFil Clean device that could affect its safety without the expressed consent of
KEMPER GmbH! Used spare parts shall comply with the technical requirements
specified by KEMPER GmbH. This is always ensured when genuine spare parts are
used!
The operation, maintenance, repairs and transport of the MaxiFIl Clean device may
only be performed by trained and knowledgeable staff. Staff responsibilities in terms
of operation, maintenance, repairs and transportation shall be clearly defined.
- 42 –
Technical changes and errors reserved.