Residual Risk - Kemper MaxiFil Clean Manual De Uso

3.5

Residual risk

Even if all safety provisions are adhered to, the MaxiFil Clean device operation
remains associated with the below-described residual risk.
All individuals handling the MaxiFil Clean device shall be aware of the residual risks
and follow the instructions to prevent accidents or damage as a result of residual
risks.
It may be necessary to disassemble external units for adjustment and preparatory
works. This may create various residual risks and potential hazards of which the
operator should be aware.
CAUTION
Risk of severe damage to the respiratory organs and respiratory
system - use respiratory protection. For example
KEMPER autoflow XP or a respiratory ask with a class FFP2 filter
in accordance with EN 149.
Skin contact with welding smoke, etc. can result in irritation in
sensitive individuals - wear protective clothing.
Before commencing the welding process, make sure the exhaust
arm and exhaust nozzle are properly configured, ensure the
filtration unit does not show visible damage and leaks and that it
is in an operable state.
When replacing the tank for disposal, the skin can come into
contact with loose dust, causing the dust to rise. Therefore, it is
necessary to use respiratory protection and protective clothing.
Clusters of burning coals in the filtration unit can lead to a
smouldering fire and release harmful/toxic fumes - switch off the
filtration unit, close the choking flap in the exhaust nozzle, allow
the unit to cool off in a controllable manner, or extinguish, secure
the dangerous area and immediately inform the relevant party.
Dust can get into the surrounding environment when the filtration
unit contains leaks. Repair any leaks immediately and clean the
contaminated area; wear respiratory system protection and
protective clothing.
KEMPER MaxiFil Clean Instruction manual - EN
- 51 –
Technical changes and errors reserved.