SFS isoweld 3000m Manual De Usuario página 44

Start-up isoweld

The induction welding tool is delivered ready for operation ex-works.

The country-specific regulations must be observed.
44
3000m
®
After opening the container, the body of the unit
can be carefully lifted out.
3.
1. Connect the tool to a suitable power
1.
source.
- the cable should not be too long
- suitable conductor cross section
- unroll extension cable
2.

Ensure that the connection is
correctly made.
2. Operate mains switch to turn unit on.
3. The display shows the input screen.