Dreame VTE1 Manual Del Usuario página 19

Care & Maintenance
Installing the Dust Cup, Pre-Filter, and Cyclone Assembly
1. Insert the cyclone assembly vertically into the dust cup, and make sure that the handle o
the cyclone assembly line up with the slot on the let side o the dust cup. Turn the handle
clockwise until it locks, then ip the handle down.
2. Place the pre-lter with its ront side acing up into the cyclone assembly.
2
3
3
1
3. Slightly tilt the dust cup so the slot aligns with the clip on the vacuum. Then gently push
the dust cup until it clicks into place.
15