Dreame VTE1 Manual Del Usuario página 22

Care & Maintenance
Cleaning the Smart Multi-Brush Bar
1. Turn the lock counterclockwise until it
stops, then remove the roller brush rom
the smart multi-brush bar.
3. When it is dirty, rinse the roller brush
with clean water until it is clean.
18
2. Use scissor to cut o the hairs and bers
that stick on the roller brush. Wipe the dust
rom the notch and transparent cover with
a dry cloth or paper towel. Thoroughly dry
beore use.
4. Stand the roller brush upright or at least
24 hours until it is ully dry.
12
11 1
10 2
24 hrs
9 3
8 4
7 5
6