Publicidad
Idiomas disponibles
Idiomas disponibles
2610055543.qxp_GKT18V-20GC 5/26/20 4:36 PM Page 7
GFCI and personal protection devices like
electrician's rubber gloves and footwear will
further enhance your personal safety.
Keep handles dry, clean and free from oil
and grease.
control the power tool.
Use clamps or another practical way to
secure and support the workpiece to a
stable platform.
against your body leaves it unstable and may
lead to loss of control.
Develop a periodic maintenance schedule
for your tool. When cleaning a tool be
careful not to disassemble any portion of
the tool since internal wires may be
misplaced or pinched or safety guard
return springs may be improperly
mounted.
gasoline, carbon tetrachloride, ammonia, etc.
may damage plastic parts.
ind Quality Products Online at:
Additional Safety Warnings
Slippery hands cannot safely
Holding the work by hand or
Certain cleaning agents such as
GlobalTestSupply
www.
Some dust created by
power sanding, sawing,
grinding, drilling, and other construction
activities contains chemicals known to
cause cancer, birth defects or other
reproductive harm. Some examples of
these chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement and
other masonry products, and
• Arsenic and chromium from chemically-
treated lumber.
Your risk from these exposures varies,
depending on how often you do this type of
work. To reduce your exposure to these
chemicals: work in a well ventilated area, and
work with approved safety equipment, such as
those dust masks that are specially designed to
filter out microscopic particles.
7
.com
sales@GlobalTestSupply.com
Publicidad
