Pioneer DEH-790 Manual Del Propietário página 5

DEH-790
3.Enclose for safekeeping the front panel
that is removed in the supplied protective
case. (Fig. 8)
(Protective case is not included in
DEH-690.)
Fig. 8
Replacing the Front Panel
With a hollow in the right-hand end of the
front panel aligned to projections on the
right-hand front wall of the equipment, press
the panel's left-hand side against the equip-
ment to put it into place.(Fig. 9) (Fig. 10)
¢ When replacing the front panel, do not
put pressure on the display or control but-
tons.
Precautions
* Do not touch the contacts on the front
panel or on the unit body, since this may
result in poor electrical contact. If dirt or
other foreign substances get on the con-
tacts, wipe them with a clean, dry cloth.
(Fig. 11) (Fig. 12)
Fig. 12
Precautions When Handling the
Front Panel
¢ Do not leave the front panel in any area
exposed to high temperatures or direct
sunlight.
Do not drop the front panel or otherwise
subject it to strong impact.
Do not allow such volatile agents as ben-
zine, thinner, or insecticides to come into
contact with the surface of the front pan-
el.
Never try to disassemble the front panel.
Adjusting Volume and Tone
Parts Identification (Fig. 1)
[1] Volume/ Audio adjustment
[2] Shift/_oudness
[3] Illumination switch
[5] Disc Insertion Slot
[6] Display
[7] Eject
[8] Source selector
Switching Power On
Tuner
Press button [8] to switch the tuner power
on. Press button [8] again to switch the
power off.
CD Player
When a disc is inserted half-way into the
disc insertion slot [5] with its label side up-
ward, the disc is automatically loaded and
played. To remove the disc, push button [7].
Changing the source
To change the source, push button [8] with
the disc inserted in the slot.
At each press of the button, the source
changes as follows: CD player — Tuner —
OFF.
Adjusting Audio
Press button [1] to adjust the volume. Each
press of button [2] changes the display and
the function of button [1] as follows:
Volume — Fader — Bass ~ Treble —
Balance ;