Silvercrest SZP 40 C2 Instrucciones De Uso página 54

Note the labelling on the packaging and separate the packaging material
components for disposal if necessary . The packaging material is labelled with
abbreviations (b) and numbers (a) with the following meanings:
1–7: Plastics
20–22: Paper and cardboard
80–98: Composites
NOTE
► If possible, keep the original packaging during the warranty period so
that the appliance can be properly packed for returning in the event of
a warranty claim .
Handling and use
This section provides important information about proper handling and operation
of the appliance .
Assembling the appliance
♦ Before using the appliance for the first time, clean all component parts
thoroughly as described in the section "Cleaning and care" .
♦ Set up the appliance in accordance with the safety instructions .
WARNING! RISK OF INJURY!
► Ensure that the mains cable plug is disconnected before assembling the
appliance .
♦ Pull the mains cable out of the cable compartment
♦ Place the motor unit
♦ Place the juice container
is pointing forwards .
♦ Put the pressing cone with sieve
♦ Insert the plug into a mains power socket .
The appliance is now ready for use .
SZP 40 C2
on a dry, stable and level surface .
on the motor unit
onto the drive shaft
.
so that the juice outlet
.
GB │ MT │ 51 ■