GreenWorks DHF403 Manual Del Operario página 4

EN
1 DESCRIPTION
1.1 PURPOSE
The basic version of the machine is a scarifier intended for
private use, i.e. for use in home and gardening environments.
The blade cylinder is designed for ripping moss and weeds -
complete with their roots - out of the soil and for loosening
the soil.
With the additional tine cylinder, the machine can be
converted to a lawn dethatcher in just a few steps.
1.2 OVERVIEW
Figure 1-8
Bail switch
1
Start button
2
Upper handle
3
Quick-release lever
4
Middle handle
5
Lower handle
6
Rear discharge flap
7
Depth adjustment lever
8
Battery compartment flap
9
Handle knob
10
Grass catcher
11
Tine cylinder
12
Handle holder
13
Handle positions
14
Bolt
15
Spacer
16
Rod
17
Slot
18
Battery compartment flap button
19
Battery
20
Safety key
21
Slide button
22
Lock handle
23
Bearing shell
24
Blade cylinder
25
1.3 PACKING LIST
1 Scarifier/Dethatcher
2 Grass catcher
3 Handle fasteners
2 SAFETY
Make sure that you follow all safety instructions.
4 Cable clips
5 Tine cylinder
WARNING
English
Refer to Safety Manual.
3 INSTALLATION
Do not use accessories that are not recommended by the
manufacturer.
Do not put in the safety key or the battery pack until you
finalised the assembly of all the parts.
3.1 UNPACK THE MACHINE
Make sure that you correctly assemble the machine before
use.
• If parts of the machine are damaged, do not use the
machine.
• If you do not have all the parts, do not operate the
machine.
• If the parts are damaged or missing, contact the service
center.
1. Open the package.
2. Read the documentation provided in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and packing material in compliance with
local regulations.
3.2 INSTALL THE LOWER HANDLE
Figure 2
1. Attach the handle holders to the sides of the machine.
2. Put the bolts of the handle knobs through the holders.
3. Turn the handle knobs clockwise to lock the lower
handle.
4. Adjust the lower handle in one of the three positions.
Make sure that the two handle knobs are in the same
position.
Do not make damage to the cables when you fold or unfold
the handle.
3.3 INSTALL THE UPPER HANDLE
Figure 3
4
WARNING
WARNING
WARNING
WARNING
NOTE
WARNING