Urmet iPerCom 1761/15 Guía Rápida De Uso página 14

FEATURES
5.
Some of the following features can also be performed through gestures. For more information, refer to the
"Complete booklet for use of gesture commands" by scanning the QR-Code at the end of the section or
by downloading the manual from the website www.urmet.com to the relative product sheet.
5.1. RECEIVING AND ANSWERING A CALL FROM A CALLING
STATION
The video door phone will ring and the display will switch on when a call is received. The caller's image
will appear on the video door phone display. If there are more than one video door phone in the apartment
when a call is received, only the Master video door phone will display the caller's image. To view the caller's
image, on a Slave video door phone, press key
Press button to reject the incoming call.
Press the button
Press the button again to end the conversation and switch off the display.
5.2. DOOR OPENER FUNCTION
The video door phone allows the opening of any pedestrian door or garage door associated with the calling
station. With the video door phone at rest
mode or during an auto-on event
(*)
• for pedestrian door by pressing the key
in the top left corner.
• for driveway gate by pressing the
14
to establish a conversation with the caller (the LED of the button will start flashing).
(with the calling station), it is possible to open:
(*)
.
receiving a call (received from the calling station), in voice
(*) (*)
, the pedestrian door opener icon appears on the display
key, the display shows the driveway gate opening icon.
DS1761-033