Publicidad
Idiomas disponibles
Idiomas disponibles
Press keys
or
to select the contact in the book to be called, then press the key
to start the call.
The display shows the following screen:
When conversation with the indoor station has been established, the LED of key
starts flashing and the
display shows the following screen:
By pressing the following
,
,
and
keys it is possible to activate the respective function (for
further details see chapter Button function).
Press the key
again to terminate the call.
5.4 RESTORE FACTORY SETTING
This function allows the video door phone to be reset to factory settings.
Press the
and
keys to select which video door phone parameters you want to reset to factory
values.
When the selection has been made, press the
key to enable or disable the parameter for reset to factory
data. Enabling is confirmed by the presence of the
icon next to the parameter name.
By default, all video door phone parameters are enabled for reset to factory data.
Press the key
to select the following icon
, then press the key
to start reset to factory data.
Press the
key to confirm reset to factory data.
Press the key
to cancel and return to the previous page.
17
DS1761-033
Publicidad
