Descargar Imprimir esta página

Uline H-4441 Manual Del Usuario página 2

Publicidad

Idiomas disponibles

Idiomas disponibles

REPLACING EXISTING BASE BRACKETS
WARNING! Unload shelves to prevent
overturning.
1.
Remove merchandise and shelves.
2. Simultaneously pull latch on each side of
back bracket away from upright. (See Figure 1)
3. Lift bracket up and out of upright. Install
replacement base bracket immediately.
Reinstall base front and base deck.
Base Size
(Shelf Depth)
Spacing (A)
13"
16"
CAUTION! Maximum shelf depth
cannot exceed base deck depth (C).
CAUTION! Use of any shelving without closed
base fronts may allow material handling or
floor cleaning equipment to collide with the
base brackets, causing the shelving to be
knocked out of alignment or collapse.
WARNING! Failure to follow these instructions
and warnings may result in overturning or
collapse of the fixture, resulting in personal
injury to employees or customers, damage to
property or damage to the fixture itself.
• These instructions and safety information should be
reviewed before using product.
• Install all shelving according to installation
instructions and use components only as instructed.
Shelving and components should only be installed
or rearranged by trained personnel who have read
and understood these instructions and warnings.
PAGE 2 OF 23
SETUP CONTINUED
Leveler
Tallest Unanchored
Upright
9¾"
54"
12¾"
72"
Figure 1
SPECIFICATIONS
SAFETY
• Local codes and regulations concerning building,
fire, sanitation or seismic requirements may apply
to some installations. It is the responsibility of the
owner of these fixtures to check with local building
authorities to determine what codes or regulations,
if any, apply and always install the shelving in
compliance with any such requirements.
• When installing or rearranging shelving, never
move assembled shelving.
• Never use damaged parts. Damaged parts may
cause shelving to be structurally unsafe or create
exposure to sharp or pointed edges. If parts were
damaged in shipment, do not use and contact
Uline Customer Service at 1-800-295-5510. If parts
are damaged after shipment, discontinue use
immediately and order replacement parts.
Latch
Base Bracket
A
Upright
Upright
Height
C
0224 IH-4441

Publicidad

loading

Este manual también es adecuado para:

H-4442