Uline H-4441 Manual Del Usuario página 7

3. Install base decks. Tilt deck upward and hook rear
molding behind deck hold-down pin. (See Figure 15)
NOTE: If trim or shelves do not fit properly,
check to ensure unit is leveled properly.
NOTE: Deck must sit on lock tab on
base end trim. (See Figure 16)
Figure 15
Deck Hold-Down Pin
PAGE 7 OF 23
ASSEMBLY CONTINUED
Figure 16
1-800-295-5510
uline.com
4. Install shelves and/or additional accessories.
(See Figure 17)
NOTE: Refer to Specifications on page 2 for
proper load and shelving arrangement.
Figure 17
0224 IH-4441