Dreame D9 Manual Del Usuario página 10

Routine Maintenance
EN
Note: Please use dry dishcloth or cleaning, as the robot and inner charging dock include
sensitive elements. Do not use wet dishcloth to prevent damage caused by water.
Clean the Laser Distance Sensor / Returning to
Charge Sensor /Edge Sensor
Clean the Cli Sensor
16
Clean the Charging Contact
Robot Restarting
I the robot stops responding or cannot be turned o, press and hold down the
button or 10 seconds to orceully turn it o. Then press and hold the button
or 3 seconds to turn the robot on.
Battery
The robot contains a high-perormance lithium-ion battery pack. Please ensure
that it remains well-charged during daily use to maintain optimal battery
perormance. I the robot is not used or an extended period, turn it o and
put it away. To prevent damage rom over-discharging, the robot should be
recharged at least once every three months.
FAQ
Problem Type Solution
Battery level is low. Recharge the robot at the charging dock, then try again.
Robot does not turn on
The ambient temperature is too low (below 0°C or too high (above 40°C. The operating temperature o the
robot is 0°C to 40°C.
The charging dock is not receiving power. Please conirm that both ends o the power cord are plugged in correctly.
Robot does not recharge
Poor contact. Clean the charging contacts o the charging dock and the robot.
Robot does not return to There are too many obstructions around the charging dock. Place the charging dock in a more open area.
charging dock Please clean the dock's signaling area.
Robot is malunctioning Turn o the robot and then reactivate it.
A oreign object might be caught in the main brush, side brush, or one o the main wheels. Stop the robot and
Robot makes a strange noise
remove any debris.
The dust bin is ull. Please clean it.
Robot no longer cleans
eiciently or leaves dust The ilter is blocked. Please clean it.
behind A oreign object is caught in the main brush. Please clean it.
There is something wrong with the Wi-Fi connection. Reset the Wi-Fi and download the latest version o the Mi Home/Xiaomi
Home app, then try reconnecting.
Location permission is not opened. Please ensure the location permission on the Mi Home/Xiaomi Home app is opened.
Robot cannot connect to
Wi-Fi signal is weak. Make sure the robot is in an area with good Wi-Fi coverage.
Wi-Fi
5GHz Wi-Fi is not supported. Please ensure your robot connects to 2.4GHz Wi-Fi.
The user name or passward o Wi-Fi is incorrect. Please ensure enter correct user name and passward.
Robot does not perorm
Robot has low battery. Scheduled cleaning will start ater charging.
scheduled cleaning
EN
17