How to Use
EN
1. Turn On/O
Press and hold the button
or 3 seconds to turn on the robot. Once the power
indicator turns solid white, the robot is in standby mode. To turn o the robot,
press and hold the button
or 3 seconds while the robot is stationary. Turning
o the robot will end the current cleaning task.
2. Start Cleaning
Press the button
briely to turn on the robot. Upon activation, the robot will
accurately map out routes, and then methodically clean each room in a way
that it irstly cleans along edges and walls and then cleans loors in an S-shape
pattern to ensure a thorough job.
Note: I the battery is too low, the robot will automatically return to the dock to charge. It
will resume unnished cleaning tasks ater charging to the appropriate power.
(Resume Cleaning mode need to open in advance on the APP.)
10
3. Cleaning Mode
Four cleaning modes are available in the Mi Home/Xiaomi Home app: Quiet,
Standard, Strong and Turbo. The deault mode is Standard.
4.Pausing/Sleep Mode
Pausing: Press any button to pause the robot during cleaning.
Sleep Mode: The robot will automatically enter sleep mode ater 10 minutes o
inactivity, then the power and charging indicators will go o. To wake up the
robot, press any button.
Note:
•
The robot will turn o automatically in the sleep mode more than 12 hours.
•
When the robot is paused, placing it onto the charging dock will end the current cleaning
task.
5. Do Not Disturb Mode
Do Not Disturb mode prevents the robot rom automatically starting cleaning
tasks, and the power indicator remains o. You can enable Do Not Disturb or
modiy its hours in the app.(The mode is opened by deault rom 22:00 to
08:00.)
Note:
•
Scheduled cleanups will still be carried out during the DND period.
•
The robot will continue cleaning ater this period ends.
How to Use
6. Spot Clean mode
When the robot is in standby mode or paused, press and hold the button
3 seconds to start Spot Clean mode. In this mode, it will clean a square-shaped
area o 1.5 ×1.5 meters directly around the robot. When the spot cleaning is
done, the robot will automatically return to its original location and shut o.
1.5 meter
1.5 meter
Note: Activating Spot Clean mode will end the current cleaning task o the robot.
7. Scheduled Cleaning
or
You can schedule cleaning time in the Mi Home/Xiaomi Home app. The robot
will automatically start cleaning at the designated time and then return to the
charging dock to recharge when the cleaning is done.
8. More APP Functions
Follow the instructions on the APP interace to use more unctions. The version
o the app might have been updated, and please ollow the instructions based
on the current app version.
EN
11