Impecca RS-1963 Manual De Usuario página 11

Part
Interior & Door Liners
Door Gaskets
Drawers & Bins
Glass Shelves
Exterior
Exterior (Stainless Steel
Models Only)
Replacing LED Bulbs
CARE & CLEANING TIPS
What To Use
• Soap and water
• Baking soda and water
• Soap and water
• Soap and water
• Soap and water
• Glass cleaner
• Mild liquid sprays
• Soap and water
• Non-abrasive glass cleaner
• Soap and water
• Stainless steel cleaner
• Unplug refrigerator
• Wear gloves
• Remove the refrigerator light
cover
• Replace old LED light board
• Replace light cover
• Plug in the refrigerator
–11–
Tips and Precautions
Use 2 Tbsp of baking soda in 1 qt of warm water. Be sure to
wring excess water out of sponge or cloth before cleaning
around controls, light bulbs or any electrical part.
Wipe gaskets with a clean soft cloth.
Use a soft cloth to clean drawer runners and tracks.
Allow glass to warm to room temperature before immersing
in warm water.
Do not use commercial household cleaners containing am-
monia, bleach or alcohol. Use a soft cloth to clean.
DO NOT use a dry cloth to clean smooth doors.
Never use CHLORIDE or cleaners with bleach to clean stain-
less steel.
Clean stainless steel front and handles with non-abrasive
soapy water and a dishcloth. Rinse with clean water and a soft
cloth. Use a non-abrasive stainless steel cleaner.
These cleaners can be purchased at most home improvement
or major department stores. Always follow the manufactur-
er's instructions. Do not use household cleaners containing
ammonia or bleach.
NOTE: Always clean, wipe and dry with the grain to prevent
scratching.
Wash the rest of the cabinet with warm water and mild liquid
detergent. Rinse well, and wipe dry with a clean soft cloth.
CAUTION: Wear gloves when replacing LED boards.