Publicidad
Idiomas disponibles
Idiomas disponibles
Charging Battery Pack
Plug charger cord into your standard power
outlet. With no battery pack inserted, the
bottom LED on the battery charging indicator
7 is continuously lit green. This indicates the
charger is receiving power and the charger is
ready for operation.
When you insert the battery pack into the
charger 2. The charger's green LED indicator
light will begin to "BLINK". Thanks to the
intelligent charging process, the battery will be
charged with optimal charge current depending
on battery temperature, voltage and battery
type. See chart on page 6 for approximate
charging times with Standard charging mode
and "Power Boost" charging mode.
The factory default charging mode is the
Standard charging mode. "Power Boost"
charging mode can be activated by pressing the
"Power Boost" button or using Bosch ToolBox
app. Once the "Power Boost" charging is
completed, the charging mode will be switched
back to the default charging mode automatically.
The default charging mode can be changed
using the connectivity module GCY-42 (sold
separately) and Bosch ToolBox app.
SETTING THE DEFAULT CHARGING MODE
There are 3 modes controlled by a slider bar in
the Bosch ToolBox app: Power Boost, Standard,
and Max Lifetime. Additionally, Storage Mode
can be selected using a toggle The active
charging mode can be set for a single charging
event or it can be set as a default for all charging
cycles. If a single event type is set, the next time
a battery is charged, it will revert back to the
Charging
"Power Boost"
modes
button light
Standard
OFF
Power Boost
ON
Max Lifetime
OFF
Storage
OFF
default. The app Charging Mode slider indicates
the charging mode.
IDENTIFICATION OF CHARGING MODES
"POWER BOOST" MODE
The "Power Boost" function charges batteries
up to around 50% battery capacity in rapid
Operating Instructions
Charging indicator LEDs
during battery charging
(continuously lit or
flashing)
5 LEDs
3 LEDs
4 LEDs
3 LEDs
10
charging mode. This means batteries are
ready for use sooner than if charged using the
Standard charging mode.
If the battery remains in the charger, it
automatically keeps charging in Max Lifetime
Mode up to around 80% battery capacity.
Rapid charging speeds vary for different battery
types. Certain batteries are not capable of
charging faster than the Standard charging
mode. All batteries are limited to a maximum
charge of around 80% with Power Boost mode
active. See charging times and compatibilities
in chart on page 6.
STANDARD CHARGING MODE
The battery is charged up to around 100%
battery capacity. The Standard charging mode
provides the best combination of fast charging
time and full battery charge while optimizing the
service life of the battery.
Standard mode is active as the Factory Default.
It is also set as active for a single charging event
after deactivating "Power Boost" mode using the
Power Boost button.
MAX LIFETIME MODE
The battery is charged up to around 80% battery
capacity. This mode charges the battery more
slowly and thereby significantly prolonging its
service life.
This mode can only be activated using the
Bosch ToolBox app.
STORAGE MODE
The long-term storage mode is intended
exclusively for extensive periods of storage (six
months or more). The battery is charged up to
only around 50% battery capacity so that it can
be stored unused for a long time.
Note: Charger will not discharge a battery to
50% capacity for storage. Before long term
storage a battery with over 50% battery
capacity should be discharged in a tool to 50%.
This mode can only be activated using the
Bosch ToolBox app.
BATTERY COOLING
("ACTIVE AIR COOLING")
The fan control unit integrated into the charger
monitors the temperature of the inserted
battery. As soon as the battery temperature is
above approx. 32 °F (0 °C), the battery will be
cooled by a fan.
Publicidad
