Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Problem
White smoke is coming out
of the air fryer.
Dark smoke is coming out of
the air fryer.
The air fryer has a plastic
smell.
Display shows Error Code
"E1".
Display shows Error Code
"E2".
Display shows Error Code
"E3".
If your problem is not listed, please contact Customer Support (see page 10).
WARRANTY INFORMATION
Arovast Corporation warrants all products to be of the highest quality in material, craftsmanship, and service,
effective from the date of purchase to the end of the 2-year warranty period.
This warranty does not limit your rights under the applicable local consumer protection laws. If the applicable
local consumer protection laws requires the manufacturer to provide a longer warranty period, the warranty
period shall be extended to the shortest period required by the laws.
If you have any questions or concerns about your new product, please contact our helpful Customer Support
Team.
CUSTOMER SUPPORT
If you have any questions or concerns about your new product, please contact our helpful
Customer Support Team.
Arovast Corporation
1202 N. Miller St., Suite A, Anaheim, CA 92806, USA
Email: support.europe@cosori.com
*Please have your invoice and order ID ready before contacting Customer Support.
10
The air fryer may produce some white smoke when you use it for the
first time. This is normal.
Make sure the basket and the inside of the air fryer are properly cleaned
and not greasy.
Cooking greasy foods will cause oil to collect beneath the crisper plate.
This oil will produce white smoke, and the basket may be hotter than
usual. This is normal, and should not affect cooking. Handle the basket
with care.
Immediately unplug your air fryer. Dark smoke means that food is
burning or there is a circuit problem. Wait for smoke to clear before
pulling the basket out. If the cause was not burnt food, contact Customer
Support (see page 10).
Any air fryer may have a plastic smell from the manufacturing process.
This is normal. Follow the instructions for a Test Run (page 6) to
decrease the plastic smell. If the plastic smell does not decrease, contact
Customer Support (see page 10).
There is an open circuit in the temperature monitor. Contact Customer
Support (see page 10).
There is a short circuit in the temperature monitor. Contact Customer
Support (see page 10).
The air fryer's overheat protection has activated. Turn off and unplug the
air fryer and allow it to cool completely. If the display continues to show
"E3", contact Customer Support (see page 10).
Possible Solution
Publicidad
