Publicidad
Idiomas disponibles
Idiomas disponibles
Pipe Tape
For safe operation of the faucet, please observe the following:
„ Operating Pressure:
Minimum Pressure ...............��20 psi (0�14 MPa), dynamic
ƒ
Maximum Pressure ...............�80 psi (0�55 MPa), static
ƒ
„ Do not use the product at an ambient temperature below
„ Do not reverse the hot and cold water inlets�
„ Do not use steam for hot water supply�
„ Do not disassemble the ceramic valve�
„ To ensure the product maintains its EPA Standard flow rate, always use
the manufacturer's specified aerator for that faucet�
Faucet Body Installation
1� Insert flexible hoses and lift
rod through the hole on deck
one at a time�
2� Insert the lift rod from beneath
the faucet and thread it into
the lift knob�
3� Slide the bracket into place
and secure the spout
with nuts�
4� Adjust the spout to face
forward� Hold the spout in
place and tighten nuts�
5� Connect flex hoses to supply
lines, the left hose to the hot
supply line and the right hose
to the cold supply line�
COMMON TOOLS NEEDED
Adjustable Wrench
WARNINGS
INSTALLATION PROCEDURE
Adjustable Pliers
3
Phillips Screwdriver
32 ºF (0 ºC)�
Lift knob
Flex hose
Bracket
Lift rod
Locknut
Publicidad
