Toto Soiree TL960SDLQR Manual De Instrucciones Y Del Propietario página 4

Drain Installation
1� Apply pipe tape to the flange
threads�
2� Insert flange into the drain hole
3� Assemble the gasket, flange
nut, and lock nut�
4� Install the drain body onto the
flange�
5� Secure the drain assembly by
tightening the flange nut and
lock nut�
6� Apply pipe tape to the threads
of the tail piece and install the
tail piece to the drain body�
7� Insert the drain stopper into
the flange�
8� Assemble the pivot rod as shown in the diagram�
9� Insert the pivot rod into the drain stopper hole and tighten the
lock nut
10� Insert the lift rod and pivot rod into the connecting block� Tighten
both rods with screwdriver
INSTALLATION PROCEDURE
4
Drain stopper
Flange threads
Flange nut
Lock nut
Drain body
Tailpiece threads
Tailpiece
Flange
Lift rod
Gasket
Pivot rod
Gasket
Spring
Seal
Connecting
block