ENGLISH
Return to the charging base
Press the back home button on the robot or on the remote control to send the robot to the
charging base.
Power
Off
Hold down the Start/Pause button on the robot to turn it off.
Warning:
The robot vacuum cleaner has a power switch (with positions I and 0) located on the lower
part of the main body. If the robot will not be used for long periods of time, it is suggested to
switch it off. As a safety measure, if the robot is switched off, it will restore the factory default
settings. To operate the robot, the switch must be in the on position (I).
Cleaning modes
This robot includes different modes and functions that can be activated from the remote
control.
Auto mode. Fig.
20
-
Press the Start/Pause button on the robot vacuum cleaner or on the remote control, the
robot will start the automatic cleaning.
-
The robot will clean the whole surface, edges, around objects such as tables, chairs etc.,
until the battery is low, then it will return to the charging base.
Scrubbing Mode. Fig. 21
-
Attach the mop to the mixed tank and fill the tank with water.
-
Place the mixed tank on the robot vacuum cleaner and select the scrubbing level with the
remote control: High, Medium, or Low.
-
Once you have selected the desired scrubbing level from the remote control, the
robot vacuum cleaner will start the All in One function to vacuum, scrub, and sweep
simultaneously thanks to its mixed tank.
Note:
-
If you wish to mop, do not fill the water tank.
-
If the robot has the mixed tank installed with water in it, when it leaves the charging base,
it will turn around itself to soak the mop.
-
To ensure a perfect scrubbing from the start, it is suggested to dampen the mop evenly
with water before fixing it to the mixed tank. It is also recommended to wash the mop after
every use.
-
It is recommended to be present when the robot is scrubbing.
-
When the robot vacuum cleaner returns to the charging base, you must remove the mop.
Do not leave the robot vacuum cleaner charging with the mop assembled.
44