cecotec PERFECT&CLEAN CONNECTED TITANIUM Manual De Instrucciones página 42

ENGLISH
Press until they click to make sure they are properly fixed. Fig. 16
4. Press the power switch located on the side of the robot. Make sure the power switch is in
the on position (I). Fig. 17
5. Place the robot on the charging base and make sure the charging terminals on the robot
match those of the charging base. Once the robot is properly placed, it will beep once and
the light indicator will light up. If the light is oscillating orange, it means the battery is
not completely charged. To ensure the maximum cleaning time, wait until the light turns
into steady blue, as this will indicate the battery is fully charged and the robot is ready to
clean. Fig. 18
4. OPERATION
Starting the cleaning. Fig.
- Hold down the Start/Pause button on the robot to turn it on.
- Press the Start/Pause button on the robot vacuum cleaner or on the app to start cleaning.
Note
- If the robot runs out of battery while cleaning, it will automatically return to the charging
base. Once the battery is fully charged, the robot can start a new cleaning cycle.
- If there is no good access to the charging base, the robot will not be able to return to it. If
this happens, place it manually on the charging base.
Pausing the cleaning. Fig.
- Press the Start/Pause button on the robot vacuum cleaner or on the app to pause the
cleaning process.
- Press the Start/Pause button on the robot vacuum cleaner or on the app to resume the
cleaning process.
Returning to the charging base
Press the Back home button on the robot or on the app (with a house icon) in order to send the
robot to the charging base. The robot vacuum cleaner will continue vacuuming until it reaches
the charging base.
Turning off. Fig. 19
Hold down the Start/Pause button on the robot to turn it off.
Warning
The robot vacuum cleaner has a power switch (with positions I and 0) located on the side of
the main body. If the robot will not be used for long periods of time, it is recommended to turn it
off using this switch. As a safety measure, if the robot is switched off, it will restore the factory
42
19
19