cecotec PERFECT&CLEAN CONNECTED TITANIUM Manual De Instrucciones página 43

default settings. To operate the robot, the switch must be in the on position (I).
Cleaning modes
This robot includes different modes and functions that can be activated via the app.
Automatic mode. Fig. 20
- Press the Start/Pause button or select the auto cleaning mode on the app, then the robot
vacuum cleaner will start the automatic cleaning.
- The robot will clean the whole surface, edges, around objects such as tables, chairs etc.,
until the battery is low, then it will return to the charging base.
Random mode
The robot vacuum cleaner will clean randomly until the battery percentage is low and it will
return to the charge base.
To activate this mode, press the random cleaning button on the app.
Scrubbing mode. Fig. 21
- Attach the mop to the bracket and the latter to the mixed tank. Fill the water tank.
- Place the mixed tank on the robot vacuum cleaner and select the scrubbing level with the
remote control: high, medium or low.
- Once you have selected the desired scrubbing level on the app, the robot vacuum cleaner
will start the All in One function to vacuum, scrub and sweep simultaneously thanks to its
mixed tank.
Note
- If you wish to mop, do not fill the water tank.
- If the robot has the mixed tank installed with water in it, when it leaves the charging base,
it will turn around itself to soak the mop.
- To ensure a perfect scrubbing from the start, it is suggested to dampen the mop evenly
with water before fixing it to the mixed tank. It is also recommended to wash the mop after
every use.
- It is recommended to be present when the robot is scrubbing.
- When the robot vacuum cleaner returns to the charging base, you must remove the mop.
Do not leave the robot vacuum cleaner charging with the mop assembled.
Spiral mode. Fig. 22
The robot will carry out an intense cleaning of a specific area when this mode is activated. It
will start cleaning at a specific spot and will move outwards in a spiral motion (1 metre). Then,
it will return to the starting spot in an inwards spiral motion again.
- Once it has finished and returns to the starting spot, the robot will start cleaning in Auto
mode until it runs out of battery.
ENGLISH
43