Publicidad
Idiomas disponibles
Idiomas disponibles
water from backing up and entering the drinking-water
system. The disconnector must comply with EN 60335-2-79
ANNEX A.
- This device must not be controlled by external switching
elements such as timers, or connected to electrical circuits
that are continuously switched on and off.
- Release the trigger when switching from high to low
pressure.
- Keep the high-pressure hose away from sharp objects. The
burst of a high-pressure hose could cause injury. Inspect the
high-pressure hose regularly and replace it if necessary. Do
not try to fix a damaged high-pressure hose.
- Keep all connections dry and off the ground to avoid risk of
electric shock. Do not touch the plug with wet hands.
- Do not use a pressure higher than the one permitted by
the parts of the pressurisation system (high-pressure
hose, connections, etc.). Make sure every component and
accessory is rated to withstand the maximum operating
pressure of the unit.
Repairing double-insulated devices
- A double-insulated device is equipped with two insulation
systems instead of an earth connection. No earth-connection
means are provided for double-insulated devices, nor
should they be added to the product. The repair of a double-
insulated appliance requires extreme care and knowledge
of the system and should only be carried out by qualified
personnel.
- Spare parts for a double-insulated product must be identical
to the original parts. A double-insulated device is marked
with the words "Double Insulation", "Double Insulated", or
this icon
HY D RO BOOST 16 0 0 C AR&G AR DE N
14
.
Publicidad
