Lifting user
1� Make sure the floor is level�
2� Make sure the MRS Duo are stable, screw the
adjustable screws in foot to correct position
3� Place the MRS Duo straight above the user�
4� Read the user manual for Molift Air or Nomad
before lifting patient�
Never lift the user higher than
necessary to carry out a lift.
Never leave a user unattended in a
lifting situation.
Transport
1� Secure trolley (se page 6, fastening end stop
temporarily)
2� Remove quick release bolt and lower MRS
Duo�
3� Place the quick release bolt in the transport
hole (lowest hole)
4� Transportation height is now 1,7 m�
5� Move the MRS Duo as shown in illustration
How to use MRS Duo
Transport and storage
MRS Duo can be stored and transported under
temperatures between -25 - 70 °C and Relative
Humidity between 15 - 93 %�
9
Molift MRS Duo / www.etac.com
Never transport MRS Duo without
quick release bolt inserted. Post
may fall apart.
EN