cecotec CONGA ANIMAL Manual De Instrucciones página 48

ENGLISH
- Press the button
return to Standby mode.
- Note: The robot will activate the Edge mode when it detects the first edge.
Automatic charge/Back home
- Press the button
charge mode from the Standby mode.
- Press the button
to Standby mode.
Room cleaning
- Press the button
charge mode from the Standby mode.
- Press the button
return to Standby mode.
- Note: This mode is designed to clean rooms. During this mode, close the door in the room
to be cleaned.
- Note: The robot will return to the charging base automatically when the battery is low.
2 IN 1 WATER TANK
The robot includes a water tank which allows scrubbing once the dry cleaning is finished.
Remove the dust tank and replace it with the water tank. The 2-in-1 function of the water tank
allows vacuuming with 3 vacuum levels and scrubbing at the same time.
WARNING:
- Do not use the robot with the water tank on carpets.
- Remove the water tank from the robot to fill it with water.
- Remove the water tank to charge the robot.
- Make sure the mop is not excessively wet to prevent the wheels from slipping.
- Make sure the mop bracket is properly fixed in the lower part of the robot.
- To ensure an efficient scrubbing, it is recommended to wet the mop with water evenly
before its use.
- Do not exceed the water level marks in the tank.
Installation
- Open the cover and add water in the water tank. Fig. 13
- Install the mop.
- Fix the mop to the mop bracket as shown in Fig. 14 A.
- Install the mop bracket with the mop in the product base as shown in Fig. 14 B.
- Install the water tank.
- Replace the dust tank with the water tank. Fig. 15
- Select the scrubbing mode.
CONGA ANIMAL
48
on the robot or the button
on the robot or on the remote control to activate the automatic
del robot o el botón
on the robot or on the remote control to activate the automatic
on the robot or the button
on the remote control for the robot to
on the remote control for the robot to return
on the remote control for the robot to